Understand the duct tape selection skills and type analysis.

Understand the duct tape selection skills and type analysis.


News 17 Feb 2021

In the packaging, each manufacturer must have a good standard, which can directly show your service attitude, so when purchasing packaging duct tape, you must carefully understand the quality of its quality.

1. The first thing to do when you get the duct tape is to feel whether it is sticky enough with your hands, and whether you can feel your requirements.

2. Put the duct tape on the nostrils and smell the smell. If the smell is smelly or strong, the quality of the glue is not good.

3. For duct tapes of the same specifications (referring to length, width, and single-layer thickness), first look at the thickness of the single-layer adhesive paper and the tensile strength of the tape. Be sure to choose good tensile strength. As for the thickness, you can choose according to your needs.

duct tape

Here is a brief introduction of several kinds of duct tape:

1.Electrical tape.

It is made of soft polyvinyl chloride (PVC) film as the base material and coated with UL special rubber pressure sensitive adhesive. It has good insulation, flame resistance, voltage resistance, cold resistance and other characteristics. It is suitable for automobile wiring harness, wire winding, and insulation. Protection, degaussing coils, communication wiring, etc.

2. Industrial tape.

It is made of polyvinyl chloride (PVC) film as the base material and coated with special rubber-type pressure-sensitive adhesive. It has good windability, acid and alkali resistance, abrasion resistance, good oil resistance, and anti-fading. It is suitable for roads, pillars, Marking of warning zone and pipeline protection.

3. Packing tape.

It is made of polyvinyl chloride (PVC) film as the substrate and coated with special rubber-type pressure-sensitive adhesive. It has the advantages of easy tearing, strong adhesion, good weather resistance, and strong tensile strength. It is suitable for high-end, heavy packaging sealing Stick and fix.

4. Protective tape.

It is made of polyvinyl chloride (PVC) film as the base material and coated with special rubber-type pressure-sensitive adhesive. It is easy to tear, no glue residue, good processability, and good lamination. It is suitable for furniture, speakers, wood board, shoes Surface protection of materials, colored steel, aluminum alloy doors and windows, etc., to prevent wear and reduce the loss of items.

When choosing the duct tape, choose one that is not easy to break and has high viscosity; the weight of the tape should be sufficient; when you hold the duct tape, you can use your fingers to press the tape from the back of the tape, and it feels very hard. Then the tape is tightly rolled, and the number of meters is very large, which is much longer than the loose duct tape of the same thickness.

Get In Touch